|
Gain up to 15 whp with a Phearable.net chipped ecu!
Dyno proven results (click for a larger view):
Vehicle application list: * Manual Vehicles only.
- Acura Integra GS, RS, LS, b18a, b18b
- Acura Integra GSR, b18c1, b18c
- Acura Integra Type-R b18c5
- Honda Civic Si b16a2
- Honda Del Sol b16a3, d16z6
- Honda Civic Dx, Lx, Ex all dseries motors.
- Honda Prelude h22 vtec motors.
- Built motors with aftermarket cams, pistons etc.
- B20 VTEC conversions & Ls/Vtec motors.
- Turbo Charged & Supercharged motors.
- And more... please inquire.
Ecus supported by obd1 eprom basemaps:
92-95 Honda/Acura OBD1 ECUs only.
USDM Vtec: P28, P72, P61 JDM Vtec: p30, p72,
p08, p27, pr3, p91
USDM Non-Vtec: P75, PR4, P05, P06
Not familure with what a chipped ecu is or
any of these terms?:
Click here to view our technical
FAQ/Article on ecu tuning.
Ecu chipkit & 28 pin eprom install how
to video:
How to remove/install a 28 pin eprom
chip in a socketed ecu video.
| Free with your order: |
Price |
| Dyno proven
custom ignition timing & fuel maps. |
Free! |
| CEL Shift Light. |
Free! |
| 2 step (launch
control) |
Free! |
| Speed governor
disabled. |
Free! |
| Knock sensor
& Vtec speed limit disabled. |
Free! |
Ordering Parameters:
What if I don't know what vtec point or revlmit to use?:
Simply leave the field blank & phearable.net will provide the best setting for your engine setup.
If you would like the 2 step or cel shiftlight feature but do not know what rpm you would like it at, simply specify YES in the field.
*We do not recommend the 2 step unless you know exactly what rpm you want it set at. The feature can't be adjusted without re-programming the ecu.
|
