OBD Harnesses

$69.00
Description: An obd2 to obd1 jumper harness is a plug & play harness which allows you to run an obd1 engine computer in your obd2 vehicle without...

$69.00
Description: An obd2 to obd1 jumper harness is a plug & play harness which allows you to run an obd1 engine computer in your obd2 vehicle without...

$149.00
OBD0 to OBD1 Conversion Harness Kit (MPFI only): * 1988-1991 Honda CRX - (Hf, Si or MPFI converted only) * 1988-1991 Honda Civic -...

$49.00
This is a obd0 to obd1 distributor harness plug adapter for MPFI obd0 engine harnesses. This will prevent you from having to complete any wiring...
+

$8.00
Obd1 Ecu Pin With Pigtail. Please select if you need a large pin (for pin a4 vtec) or small pin (for d6 vtec pressure). Wiring vtec will require a large...

$59.99
This distributor adapter allows a OBD1 Distributor to plug into a 1996+ OBD2 10-pin engine harness. This is ideal for: - 1996-1998 Civics...
+

$59.99
This jumper allows you to plug & play an Obd1 Engine harness to an Obd2 10 pin Distributor. Important note: Distributor Jumper Harness is...
+

$129.00
Example: You have an OBD2 USDM prelude with an external coil & you want to use an obd1 h22 distributor. You would select Type: OBD2 USDM Prelude to OBD1...

$49.00
This adapter allows you to plug in an obd2 alternator into an obd0 or obd1 honda/acura engine harness. (1988 to 1995)
+

$59.99
This will convert a 1996+ OBD2 10-pin engine harness distributor plug to plug into an OBD2 8-pin Distributor. OBD2 10-pin Distributor Style Vehicles...
+

$59.99
This jumper allows you to plug & play an Obd2 8 pin engine harness into a Obd1 Distributor. OBD1 Distributor to 8-PIN OBD2 Engine Harness...
+

$59.99
This distributor adapter is made for...
+

$59.99
This adapter is made for a 1999-2000...
+

$59.99
This adapter is made for a 1992-1995...
+

$349.00
Rywire K-Series Chassis Adapter This adapter is made to allow the installation of a K-Series engine with the 02-04 K20 engine harness. It will also...

$59.99
This will convert an OBD0 '88-'91 Civic CRX or Integra (MPFI) to an OBD2 8-pin distributor. ****RETURNS/EXCHANGES ARE NOT ACCEPTED ON THIS...
+

$179.00
This is the adapter harness which is required to run a Ktuner ecu on your 02-04, 02-05 civic SI, or your swap car using an 02-04 rsx type s engine harness....
+