This is our popular Front Block Port coolant kit. It uses the front block port on b and d series engines as the feed. For the return the kit is supplied with a AN 6 aluminum weld bung which can be welded to the top or bottom end tank of your aluminum radiator.
*28mm to AN 6 front block port
*Two 14mm to -6 fittings for GT series turbos
*Two AN 6 90 degree fittings
*Two AN 6 45 degree fittings
*5 ft of AN 6 hose
*1 -6 aluminum weld bung for the radiator
The Banjo option is for GT series turbos with the 14mm inlet/outlet. The banjo option makes installation a lot easier on GT30r turbos and smaller. Since there is not much room in between the exhaust and compressor housings to get a wrench in there to tighten the AN hose ends. So the banjo option makes it a lot easier.