B&R Turbo Oil Return Kit Honda/Acura B/D/H/K Series

$169.00
+

Our B & R Fittings oil return kits come with everything you need to complete your oil return line.

Bottom Mount Turbo Manifold

1 14" line with AN 10 45º assembled on one end

1 AN 10 weld bung

1 AN 10 straight hose end

1 AN 10 to 1/2"NPT 45º degree male to male adapter

1 t3/t4 oil return flange with 1/2"NPT female outlet (inclucdes gasket and two bolts for turbo)

GT series turbos comes with a billet oil return flagne with AN 10 male machined into the flange.

Top Mount Turbo Manifold

1 24" line with a AN 10 45º attached on one end

1 AN 10 weld bung

1 AN 10 straight hose end

1 1/2"NPT to AN 10 straight adapter

1 t3/t4 turbo flange with 1/2"NPT female outlet (inclucdes gasket and two bolts for turbo)

GT series turbos comes with a billet oil return flagne with AN 10 male machined into the flange.

Note: All stock b-series oil pans are made out of steel, and all stock k-series are made out of aluminum. Some stock h-series motors have aluminum oil pans and the same with the d-series. Its the customers responsibility to know what type of oil pan they have. If you have a moroso oil pan please choose the 1/2"NPT to -10 adapter. Also the two bolts supplied with the oil return flange that bolts to the turbo are 8mm allen bolts. Most turbos use this size, in the event your turbo has different size bolts its the customers responsibility to get the correct ones. We supply the 8mm bolts as a courtsey. If its not 8mm then most likely its 3/8" bolt.