Please Read Before Ordering:
- NO TUNE OR CALIBRATION REQUIRED FOR STREET MAF HOUSING
- RACE MAF-SPECIFIC CALIBRATION OR TUNE IS REQUIRED FOR RACE MAF HOUSING
- HONDATA & KTUNER BOTH OFFER RACE MAF BASEMAP CALIBRATIONS
- FITS 2017-2020 HONDA CIVIC SI
- 2022 11th GEN SI & NON-SI MODELS REQUIRE MODIFICATIONS: NOT ALL BRACKETS WILL WORK, COUPLER WILL BE VERY TIGHT, INTAKE WILL RUB ON CHARGE PIPING. TUNE AND PRL RESONATOR DELETE KIT NEEDED.
- FITS HONDA SENSING PACKAGE
- CANADIAN MODELS REQUIRE USDM WINDSHIELD WASHER RESERVOIR CONVERSION KIT
- NOT COMPATIBLE WITH FACTORY CVT COOLER (SPAIN, TURKEY, ETC)
There's a reason our Cobra Cold Air Intake Systems is a constant topic of discussion and so highly regarded. Our CNC machined billet aluminum MAF Housing was designed to provide *factory-spec fuel trims (-4% of factory STFT & LTFT) for optimal drivability and performance. The Cobra CAI utilizes a 4" volume from the air filter into the MAF Housing and is available with two different MAF housing choices; a Street housing and a Race housing. Both housings utilizes the factory MAF sensor, but feature two different diameters and profiles. As mentioned above, the Street housing is designed to provide factory-spec fuel trims WITHOUT any tuning whatsoever. The Race housing allows a 50% larger volume of air in comparison to the Street housing, which is why a tune IS required. This larger volume of airflow reduces pumping loss and creates an unrestricted air path to feed the MAF housing with ambient temperature air.
- 15 horsepower and 12 ft/lb torque gains in comparison to stock with Street MAF housing WITHOUT TUNE !
- 20 horsepower and 15 ft/lb torque gains in comparison to stock with Race MAF housing WITH Race MAF basemap calibration on Hondata and/or KTuner!
- Larger gains to be seen at higher power levels with custom tuning
- Billet Aluminum MAF Housing (Anodized Black)
- PRL Motorsports High Flow Oiled Cone Air Filter
- (1) 4-Ply Upper Silicone Intake Hose (Race or Street)
- (1) 6-Ply Lower Silicone Intake Hose
- HDPE Rotomolded Lower Intake Tube
- (4) 304 Stainless Steel Worm Clamps
- Stainless Steel Mounting Brackets
- Stainless Steel Hardware